Marine Engine Oil Pressure Gauge 5Bar
The Marine Engine Oil Pressure Gauge 5 Bar is a reliable instrument designed to measure engine oil pressure in marine vessels. With a range up to 5 Bar, this gauge provides accurate and critical readings to ensure proper engine lubrication. Built to endure the challenging conditions of marine environments, it features corrosion-resistant materials and a clear, easy-to-read display. This gauge helps boat operators monitor engine health, ensuring smooth operation and early detection of potential issues, thus enhancing the safety and efficiency of the marine engine.
Specification:
- Colour: Black
- Panel hole diameter: 52 mm - 2 1/16"
- Range: 0 to 5 Bar
- Lens: Dual - Anti-Fog
- Retail package 1 Pressure gauge
Sizes and mounting:
| Installation (Hole) diameter and Outside diameter: |
52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch |
| Installation depth: |
50 mm |
| Locking height with Spinlock nut: |
0.5 mm - 20 mm |
| Locking height with bracket: |
2 mm - 15 mm (Optional) |
| Flushmount: |
Optional kit A2C59510864 |
Functionality:
| Engine oil pressure upper scale range: |
0 to 5 Bar |
| Engine oil pressure under scale range: |
0 to 80 PSI |
| Sensor signal input engine oil pressure: |
Veratron Pressure sender 10 to 184 Ohm |
| Accuracy: |
< 3.6 angular degrees |
| Connection: |
Hirschmann 8 pins MQS connector |
Power supply:
| Operating voltage: |
8 to 32 Volt DC |
| Current consumption: |
< 140 mA including warning LED |
| Reverse polarity protection: |
Yes - 5 Minutes |
| Short circuit protection: |
Yes - 1 Minute |
Dial & Pointer:
| Deflection angle: |
90° |
| Dial colour: |
Black |
| Dial Illumination: |
Amber LED backlight 605nm |
| Pointer: |
White LED backlight |
| Warning LED: |
Red (632nm) |
| Programming: |
Veratron USB software kit |
Design:
| Model: |
Veratron ViewLine Marine |
| Lens: |
Dual - Anti-glare - Anti-Fog |
| Standard bezel: |
Round black (Interchangeable) |
Protection and standards:
| Front protection class: |
IP67 (IEC 60529) |
| Rear protection class: |
IP52 |
| Relative humidity: |
Maximum 95% |
| Operating temperature: |
-30°C to +80°C (Plastic bezel) |
| CE standard: |
Yes |
| DNV GL Certification: |
Yes |
| Mechanical shock continuous: |
25G - 6ms - 1Hz |
| Mechanical single shock |
100G - 11ms |
| Free fall test: |
1 Meter - 3x |
| Housing flame retarding: |
UL94-VD |
Retail package:
- Veratron ViewLine Black A2C53413150 Engine oil pressure gauge
- Spinlock nut
- Bezel round black (Interchangeable)
- Adapter cable with 8 pole MQS connector
- Rubber seal
- QR code
- Safety instructions and installation manual
- Veratron Pressure sender not included
